Help for S978 error in PLATINUM QUICKCOPY + more infos

Max Scarpa

Help for S978 error in PLATINUM QUICKCOPY + more infos
Hi Kurt & all db2-lers, thanks for the post in reply.

After a while I obtained the full JCL of PLATINUM QUICKcopy and error codes
below:

10.58.39 JOB11740 IEF403I PUTUTIL - STARTED - TIME=10.58.39
11.06.47 JOB11740 *ICH409I 978-004 ABEND DURING EXTRACT PROCESSING
11.07.18 JOB11740 IEA794I SVC DUMP HAS CAPTURED:
DUMPID=125 REQUESTED BY JOB (PUTUTIL )
DUMP
TITLE=COMPON=DLF,COMPID=SC164,ISSUER=COFMEST2,ABEND=S0978,
REASON=00000004



The Platinum quickcopy error is:

PQC0182E DYNAMIC ALLOCATION FAILURE FOR DDNAME SYSCP101
PQC0186E INTERNAL RC 008 AND RSN 0082
PQC0192E INTERNAL RC 16 AT LOCATION 0145

PQC0100I COPY DATA PROCESS ENDING
PTGL019 - ELAPSED TIME: 00:00:00


As you can see the copy was never started.

The complete JCL is below:


//*
//* MODEL = MJPTIUT DATE = 000302 TIME = 101516
//*
2 //UTIL0001 EXEC PGM=PTLDRIVM,
// PARM='EP=UTLGLCTL/XCD2,RESTART(PHASE)',
// REGION=4096K
3 //STEPLIB DD DSN=YCSPLA.VC00.LOADLIB,DISP=SHR
4 // DD DSN=YCSDB2.VC00.SDSNLOAD,DISP=SHR
5 //PTILIB DD DSN=YCSPLA.VC00.LOADLIB,DISP=SHR
6 // DD DSN=YCSDB2.VC00.SDSNLOAD,DISP=SHR
7 //PTIPARM DD DSN=YCSPLA.VC00.PARMLIB,DISP=SHR
8 //PTIMSG DD SYSOUT=*
//*
9 //SYSOUT DD SYSOUT=*
10 //SYSUDUMP DD SYSOUT=*
11 //ABNLIGNR DD DUMMY SUPPRESS ABENDAID DUMPS
//*
12 //ST01MSG DD SYSOUT=*
13 //SYSIN DD *

COPY TABLESPACE BMCACT53.*
PARTS-PER-COPY 1
STOP-LIMIT 1
COPY-TASKS 1
ALLMSGS
PQCPARM PQCDISC
COPY-BUFFERS 30
STARTUP-ACCESS RESET COPY-STATUS 0
EXCP YES MERGE-COPY NO PQC-POST-QU YES
MODIFYBITS NO SHRLEVEL REFERENCE CHECK-DUPLICATES
LINEAR YES FULL YES FULL-AUTO YES
QUICKCOPY COPY01(Y,SYSCP101,,LP,SYSDA)


The region was 4096K, not 0.

Did anyone met the same errors sometimes ?

Thanks in advance & regards

Max Scarpa
Data & System Admin



David Ayers

Re: Help for S978 error in PLATINUM QUICKCOPY + more infos
(in response to Max Scarpa)
Max, have you looked at the allocation errors in your jeslog. Some things that
may cause this are dsn masks, dsn units... There should be a member in your
parmlib that has this information in it for dynamic file allocaiton.

hth -dfa







Massimo Scarpa <[login to unmask email]> on 05/02/2000 08:42:45 AM

Please respond to DB2 Data Base Discussion List <[login to unmask email]>








To: [login to unmask email]

cc: (bcc: David Ayers/ISG/CORP/Highmark)



Subject: Help for S978 error in PLATINUM QUICKCOPY + more
infos









Hi Kurt & all db2-lers, thanks for the post in reply.

After a while I obtained the full JCL of PLATINUM QUICKcopy and error codes
below:

10.58.39 JOB11740 IEF403I PUTUTIL - STARTED - TIME=10.58.39
11.06.47 JOB11740 *ICH409I 978-004 ABEND DURING EXTRACT PROCESSING
11.07.18 JOB11740 IEA794I SVC DUMP HAS CAPTURED:
DUMPID=125 REQUESTED BY JOB (PUTUTIL )
DUMP
TITLE=COMPON=DLF,COMPID=SC164,ISSUER=COFMEST2,ABEND=S0978,
REASON=00000004



The Platinum quickcopy error is:

PQC0182E DYNAMIC ALLOCATION FAILURE FOR DDNAME SYSCP101
PQC0186E INTERNAL RC 008 AND RSN 0082
PQC0192E INTERNAL RC 16 AT LOCATION 0145

PQC0100I COPY DATA PROCESS ENDING
PTGL019 - ELAPSED TIME: 00:00:00


As you can see the copy was never started.

The complete JCL is below:


//*
//* MODEL = MJPTIUT DATE = 000302 TIME = 101516
//*
2 //UTIL0001 EXEC PGM=PTLDRIVM,
// PARM='EP=UTLGLCTL/XCD2,RESTART(PHASE)',
// REGION=4096K
3 //STEPLIB DD DSN=YCSPLA.VC00.LOADLIB,DISP=SHR
4 // DD DSN=YCSDB2.VC00.SDSNLOAD,DISP=SHR
5 //PTILIB DD DSN=YCSPLA.VC00.LOADLIB,DISP=SHR
6 // DD DSN=YCSDB2.VC00.SDSNLOAD,DISP=SHR
7 //PTIPARM DD DSN=YCSPLA.VC00.PARMLIB,DISP=SHR
8 //PTIMSG DD SYSOUT=*
//*
9 //SYSOUT DD SYSOUT=*
10 //SYSUDUMP DD SYSOUT=*
11 //ABNLIGNR DD DUMMY SUPPRESS ABENDAID DUMPS
//*
12 //ST01MSG DD SYSOUT=*
13 //SYSIN DD *

COPY TABLESPACE BMCACT53.*
PARTS-PER-COPY 1
STOP-LIMIT 1
COPY-TASKS 1
ALLMSGS
PQCPARM PQCDISC
COPY-BUFFERS 30
STARTUP-ACCESS RESET COPY-STATUS 0
EXCP YES MERGE-COPY NO PQC-POST-QU YES
MODIFYBITS NO SHRLEVEL REFERENCE CHECK-DUPLICATES
LINEAR YES FULL YES FULL-AUTO YES
QUICKCOPY COPY01(Y,SYSCP101,,LP,SYSDA)


The region was 4096K, not 0.

Did anyone met the same errors sometimes ?

Thanks in advance & regards

Max Scarpa
Data & System Admin








"This e-mail and any attachments to it are confidential and are intended solely
for use of the individual or entity to whom they are addressed. If you have
received this e-mail in error, please notify the sender. The views expressed in
this e-mail message do not necessarily represent the views of Highmark Inc., its
subsidiaries, or affiliates."



Madeleine Fournier

Re: Help for S978 error in PLATINUM QUICKCOPY + more infos
(in response to David Ayers)
Hello Massimo,

As you have the ALLMSGS parameter you should get more information in the
PTIIMSG file. But it does not seem to be allocated. So it might be worth
rerunning with that file (as well as PTIMSG).

Madeleine.


On Tue, 2 May 2000 14:42:45 +0200, Massimo Scarpa <[login to unmask email]> wrote:

>Hi Kurt & all db2-lers, thanks for the post in reply.
>
>After a while I obtained the full JCL of PLATINUM QUICKcopy and error codes
>below:
>
>10.58.39 JOB11740 IEF403I PUTUTIL - STARTED - TIME=10.58.39
> 11.06.47 JOB11740 *ICH409I 978-004 ABEND DURING EXTRACT PROCESSING
> 11.07.18 JOB11740 IEA794I SVC DUMP HAS CAPTURED:
> DUMPID=125 REQUESTED BY JOB (PUTUTIL )
> DUMP
>TITLE=COMPON=DLF,COMPID=SC164,ISSUER=COFMEST2,ABEND=S0978,
> REASON=00000004
>
>
>
>The Platinum quickcopy error is:
>
> PQC0182E DYNAMIC ALLOCATION FAILURE FOR DDNAME SYSCP101
> PQC0186E INTERNAL RC 008 AND RSN 0082
> PQC0192E INTERNAL RC 16 AT LOCATION 0145
>
> PQC0100I COPY DATA PROCESS ENDING
> PTGL019 - ELAPSED TIME: 00:00:00
>
>
>As you can see the copy was never started.
>
>The complete JCL is below:
>
>
> //*
> //* MODEL = MJPTIUT DATE = 000302 TIME = 101516
> //*
> 2 //UTIL0001 EXEC PGM=PTLDRIVM,
> // PARM='EP=UTLGLCTL/XCD2,RESTART(PHASE)',
> // REGION=4096K
> 3 //STEPLIB DD DSN=YCSPLA.VC00.LOADLIB,DISP=SHR
> 4 // DD DSN=YCSDB2.VC00.SDSNLOAD,DISP=SHR
> 5 //PTILIB DD DSN=YCSPLA.VC00.LOADLIB,DISP=SHR
> 6 // DD DSN=YCSDB2.VC00.SDSNLOAD,DISP=SHR
> 7 //PTIPARM DD DSN=YCSPLA.VC00.PARMLIB,DISP=SHR
> 8 //PTIMSG DD SYSOUT=*
> //*
> 9 //SYSOUT DD SYSOUT=*
> 10 //SYSUDUMP DD SYSOUT=*
> 11 //ABNLIGNR DD DUMMY SUPPRESS ABENDAID DUMPS
> //*
> 12 //ST01MSG DD SYSOUT=*
> 13 //SYSIN DD *
>
> COPY TABLESPACE BMCACT53.*
> PARTS-PER-COPY 1
> STOP-LIMIT 1
> COPY-TASKS 1
> ALLMSGS
> PQCPARM PQCDISC
> COPY-BUFFERS 30
> STARTUP-ACCESS RESET COPY-STATUS 0
> EXCP YES MERGE-COPY NO PQC-POST-QU YES
> MODIFYBITS NO SHRLEVEL REFERENCE CHECK-DUPLICATES
> LINEAR YES FULL YES FULL-AUTO YES
> QUICKCOPY COPY01(Y,SYSCP101,,LP,SYSDA)
>
>
>The region was 4096K, not 0.
>
>Did anyone met the same errors sometimes ?
>
>Thanks in advance & regards
>
>Max Scarpa
>Data & System Admin
>
>
>





Tim Lowe

Re: Help for S978 error in PLATINUM QUICKCOPY + more infos
(in response to Madeleine Fournier)
I know what the problem is!
You are copying BMC tablespaces using Platinum!

Just kidding! (-:

Thanks,
Tim







Massimo Scarpa <[login to unmask email]> on 05/02/2000 07:42:45 AM

Please respond to DB2 Data Base Discussion List <[login to unmask email]>








To: [login to unmask email]

cc: (bcc: Tim Lowe/sfm/spc)



Subject: Help for S978 error in PLATINUM QUICKCOPY + more
infos








Hi Kurt & all db2-lers, thanks for the post in reply.

After a while I obtained the full JCL of PLATINUM QUICKcopy and error codes
below:

10.58.39 JOB11740 IEF403I PUTUTIL - STARTED - TIME=10.58.39
11.06.47 JOB11740 *ICH409I 978-004 ABEND DURING EXTRACT PROCESSING
11.07.18 JOB11740 IEA794I SVC DUMP HAS CAPTURED:
DUMPID=125 REQUESTED BY JOB (PUTUTIL )
DUMP
TITLE=COMPON=DLF,COMPID=SC164,ISSUER=COFMEST2,ABEND=S0978,
REASON=00000004



The Platinum quickcopy error is:

PQC0182E DYNAMIC ALLOCATION FAILURE FOR DDNAME SYSCP101
PQC0186E INTERNAL RC 008 AND RSN 0082
PQC0192E INTERNAL RC 16 AT LOCATION 0145

PQC0100I COPY DATA PROCESS ENDING
PTGL019 - ELAPSED TIME: 00:00:00


As you can see the copy was never started.

The complete JCL is below:


//*
//* MODEL = MJPTIUT DATE = 000302 TIME = 101516
//*
2 //UTIL0001 EXEC PGM=PTLDRIVM,
// PARM='EP=UTLGLCTL/XCD2,RESTART(PHASE)',
// REGION=4096K
3 //STEPLIB DD DSN=YCSPLA.VC00.LOADLIB,DISP=SHR
4 // DD DSN=YCSDB2.VC00.SDSNLOAD,DISP=SHR
5 //PTILIB DD DSN=YCSPLA.VC00.LOADLIB,DISP=SHR
6 // DD DSN=YCSDB2.VC00.SDSNLOAD,DISP=SHR
7 //PTIPARM DD DSN=YCSPLA.VC00.PARMLIB,DISP=SHR
8 //PTIMSG DD SYSOUT=*
//*
9 //SYSOUT DD SYSOUT=*
10 //SYSUDUMP DD SYSOUT=*
11 //ABNLIGNR DD DUMMY SUPPRESS ABENDAID DUMPS
//*
12 //ST01MSG DD SYSOUT=*
13 //SYSIN DD *

COPY TABLESPACE BMCACT53.*
PARTS-PER-COPY 1
STOP-LIMIT 1
COPY-TASKS 1
ALLMSGS
PQCPARM PQCDISC
COPY-BUFFERS 30
STARTUP-ACCESS RESET COPY-STATUS 0
EXCP YES MERGE-COPY NO PQC-POST-QU YES
MODIFYBITS NO SHRLEVEL REFERENCE CHECK-DUPLICATES
LINEAR YES FULL YES FULL-AUTO YES
QUICKCOPY COPY01(Y,SYSCP101,,LP,SYSDA)


The region was 4096K, not 0.

Did anyone met the same errors sometimes ?

Thanks in advance & regards

Max Scarpa
Data & System Admin








Max Scarpa

Re: Help for S978 error in PLATINUM QUICKCOPY + more infos
(in response to Tim Lowe)
THANKS FOR HELP (grrrrrr.........) !!!! :-)))

Really, it's becaming a problem ......:-((((

Regards

Max Scarpa



Max Scarpa

Help for S978 error in PLATINUM QUICKCOPY + more infos
(in response to Max Scarpa)
Many many thanks to all people for help !!!!

Unfortunately the problem still remain so don't hesitate to post your
suggestions & wises

if you met the same problem using PLATINUM quickcopy or if you meet some
Platinum

technical expert....

Cheers & Regards

Max Scarpa
(unhappy) Data & System Admin