[z/OS DB2 V8] CA Log Analyzer DFSORT S0C4

Adam Baldwin

[z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
Fellow Listers, I'm trying to run a CA Log Analyzer process to extract DDL for a
dropped tablespace and I can't round getting S0C4 abends in the sort. I've
reduced the log interval to only 1 (one) second as I know the exact time of
the drop but no success...

...

START = (DATE(2008-12-22),TIME(11:19:37.00))
END = (DATE(2008-12-22),TIME(11:19:38.00))
LOGSRC = (BSDS)
OBJSRC = (CATALOG)
COPYSRC = (CATALOG)
DYNSORT = (DSNUM(12),SPACE(100,100),MAINSIZE(6000),MSG(Y))

I've tried with DSNUM from 1 up to 12, I've had MAINSIZE from 1000 up to
10000, and I've run the job with region size from 3m, 4m, 6m, 8m to 0m.

Every time I get:

LAE0008E SORT terminating. Return/Abend Code: 0C4

Anyone know of how to get round this?

Thanks, Adam

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

Phil Grainger

Re: [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Adam Baldwin)
Hi Adam

Two questions in return for you

1. Whose sort package is being called?
2. Did you check with CA support online or CA Tech Support to see if this is a known issue?

A S0C4 in sort seems more that a little odd

Phil Grainger
CA
Senior Principal Product Manager
Phone: +44 (0)1753 577 733
Mobile: +44 (0)7970 125 752
eMail: [login to unmask email]

Ditton Park
Riding Court Road
Datchet
Slough
SL3 9LL

CA plc a company registered in England and Wales under company registration number 1282495 with its registered office at the address set out above. VAT number 697904179.



-----Original Message-----
From: DB2 Data Base Discussion List [mailto:[login to unmask email] On Behalf Of Adam Baldwin
Sent: 22 December 2008 11:29
To: [login to unmask email]
Subject: [DB2-L] [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4

Fellow Listers, I'm trying to run a CA Log Analyzer process to extract DDL for a
dropped tablespace and I can't round getting S0C4 abends in the sort. I've
reduced the log interval to only 1 (one) second as I know the exact time of
the drop but no success...

...

START = (DATE(2008-12-22),TIME(11:19:37.00))
END = (DATE(2008-12-22),TIME(11:19:38.00))
LOGSRC = (BSDS)
OBJSRC = (CATALOG)
COPYSRC = (CATALOG)
DYNSORT = (DSNUM(12),SPACE(100,100),MAINSIZE(6000),MSG(Y))

I've tried with DSNUM from 1 up to 12, I've had MAINSIZE from 1000 up to
10000, and I've run the job with region size from 3m, 4m, 6m, 8m to 0m.

Every time I get:

LAE0008E SORT terminating. Return/Abend Code: 0C4

Anyone know of how to get round this?

Thanks, Adam

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

Raymond Bell

Re: [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Phil Grainger)
Install Log Master? ;o)

-----Original Message-----
From: DB2 Data Base Discussion List [mailto:[login to unmask email] On Behalf Of Adam Baldwin
Sent: 22 December 2008 11:29
To: [login to unmask email]
Subject: [DB2-L] [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4

Fellow Listers, I'm trying to run a CA Log Analyzer process to extract DDL for a
dropped tablespace and I can't round getting S0C4 abends in the sort. I've
reduced the log interval to only 1 (one) second as I know the exact time of
the drop but no success...

...

START = (DATE(2008-12-22),TIME(11:19:37.00))
END = (DATE(2008-12-22),TIME(11:19:38.00))
LOGSRC = (BSDS)
OBJSRC = (CATALOG)
COPYSRC = (CATALOG)
DYNSORT = (DSNUM(12),SPACE(100,100),MAINSIZE(6000),MSG(Y))

I've tried with DSNUM from 1 up to 12, I've had MAINSIZE from 1000 up to
10000, and I've run the job with region size from 3m, 4m, 6m, 8m to 0m.

Every time I get:

LAE0008E SORT terminating. Return/Abend Code: 0C4

Anyone know of how to get round this?

Thanks, Adam

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

Adam Baldwin

Re: [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Raymond Bell)
Hi Phil:

The sort package is DFSORT:

Z/OS DFSORT V1R5

And I'm getting:

ICE185A 0 AN S0C4 ABEND WAS ISSUED BY DFSORT, ANOTHER PROGRAM OR
AN EXIT (PHASE S 3)

So it may be that DFSORT is just reporting an abend in another module.

In the output from the LA job I get:

LAE0032E [login to unmask email] terminated with return/abend code: 0C4
BPA0071E: CALLED PROGRAM [login to unmask email] ABENDED. ABEND CODE U0200
REASON CODE
00000000 - PROCESSING TERMINATES.
RETCODE = 20

And no, I haven't talked to CA Support yet.

Cheers, Adam

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

Adam Baldwin

Re: [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Adam Baldwin)
Raymond! Where's your Christmas spirit??? Good Will to all Products etc...

Bah humbug.

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

Steen Rasmussen

Re: [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Adam Baldwin)
Which version of Log Analyzer are you using Adam ?

Steen Rasmussen
CA



-----Original Message-----
From: DB2 Data Base Discussion List [mailto:[login to unmask email] On Behalf Of Adam Baldwin
Sent: Monday, December 22, 2008 6:05 AM
To: [login to unmask email]
Subject: Re: [DB2-L] [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4

Hi Phil:

The sort package is DFSORT:

Z/OS DFSORT V1R5

And I'm getting:

ICE185A 0 AN S0C4 ABEND WAS ISSUED BY DFSORT, ANOTHER PROGRAM OR
AN EXIT (PHASE S 3)

So it may be that DFSORT is just reporting an abend in another module.

In the output from the LA job I get:

LAE0032E [login to unmask email] terminated with return/abend code: 0C4
BPA0071E: CALLED PROGRAM [login to unmask email] ABENDED. ABEND CODE U0200
REASON CODE
00000000 - PROCESSING TERMINATES.
RETCODE = 20

And no, I haven't talked to CA Support yet.

Cheers, Adam

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

Raymond Bell

Re: [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Steen Rasmussen)
Hey Adam. I think you just caught me off-guard. I was too shocked to see a non-IBM product in use at IBM. When I was there, to my eternal shame, we got rid of as many ISV tools as we could. How times change, eh?

My Christmas spirit is in Tesco's. I'm off to buy a bottle shortly.

Ho! Ho! Ho!


Raymond

-----Original Message-----
From: DB2 Data Base Discussion List [mailto:[login to unmask email] On Behalf Of Adam Baldwin
Sent: 22 December 2008 12:09
To: [login to unmask email]
Subject: Re: [DB2-L] [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4

Raymond! Where's your Christmas spirit??? Good Will to all Products etc...

Bah humbug.

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

Oscar Paalman

[z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Phil Grainger)
Hi adam,

iis it is possible the pre-allocate the necessary sort-files as a
DD-statement in the JCL-flow, so that you don't have this allocation
problem ?
for example
//SW01WK01 DD DSN=&&SORTWK01,SPACE=(CYL,(3000,1)),UNIT=DISK,
// VOL=SER=LLD131
//SW01WK02 DD DSN=&&SORTWK02,SPACE=(CYL,(3000,1)),UNIT=DISK,
// VOL=SER=LLD132
//SW01WK03 DD DSN=&&SORTWK03,SPACE=(CYL,(3000,1)),UNIT=DISK,
// VOL=SER=LLD135
//SW02WK01 DD DSN=&&SORTWK04,SPACE=(CYL,(3000,1)),UNIT=DISK,
// VOL=SER=LLD129
//SW02WK02 DD DSN=&&SORTWK05,SPACE=(CYL,(3000,1)),UNIT=DISK,
// VOL=SER=LLD134
//SW02WK03 DD DSN=&&SORTWK06,SPACE=(CYL,(3000,1)),UNIT=DISK,
// VOL=SER=LLD136 .
etc.....

Met vriendelijke groet,with kind regards,

Oscar Paalman
Belastingdienst/Centrum voor ICT
===
NOTICE: This communication is meant only for the addressee(s) named above
and may contain information which is confidential and/or legally
privileged. If you are not the named addressee(s), or the agent responsible
for receiving and delivering this communication to the named addressee(s),
this communication has been sent to you in error. If so, kindly notify the
sender and delete the information immediately. Unauthorised dissemination,
distribution, copying or reliance on this communication is prohibited and
may attract criminal penalties. Thank you.
===



------------------------------------------------------------------------
De Belastingdienst gebruikt e-mail niet voor de uitwisseling van
vertrouwelijke informatie met de burger of voor de bekendmaking
van beslissingen. De Belastingdienst hanteert conventies voor het
gebruik van e-mail. Deze zijn te vinden op www.belastingdienst.nl.


______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

Phil Grainger

Re: [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Raymond Bell)
I did a quick search and I see

Title: LAE0032E & S0C4 OR S0C1 ABEND

Description:
PROBLEM DESCRIPTION: Log Analyzer job abend with error message LAE0032E & terminated with S0C4 OR S0C1 when it was tried to process null VARCHAR column.

Does this sound likely?

This is on r11.5 and was closed on 5th December

Phil G

-----Original Message-----
From: DB2 Data Base Discussion List [mailto:[login to unmask email] On Behalf Of Adam Baldwin
Sent: 22 December 2008 12:05
To: [login to unmask email]
Subject: Re: [DB2-L] [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4

Hi Phil:

The sort package is DFSORT:

Z/OS DFSORT V1R5

And I'm getting:

ICE185A 0 AN S0C4 ABEND WAS ISSUED BY DFSORT, ANOTHER PROGRAM OR
AN EXIT (PHASE S 3)

So it may be that DFSORT is just reporting an abend in another module.

In the output from the LA job I get:

LAE0032E [login to unmask email] terminated with return/abend code: 0C4
BPA0071E: CALLED PROGRAM [login to unmask email] ABENDED. ABEND CODE U0200
REASON CODE
00000000 - PROCESSING TERMINATES.
RETCODE = 20

And no, I haven't talked to CA Support yet.

Cheers, Adam

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

Oscar Paalman

[z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Oscar Paalman)
adam,

try to pre-allocate the sortfiles in the jcl as dd-statement. also look in
the output what kind of dd-statement you need, eg //sortwk01 or //sw01wk01

example SW01WK01

//SW01WK01 DD DSN=MYFILE.SORTWK01,SPACE=(CYL,(3000,500)),UNIT=3390,
// DISP=(NEW,DELETE,DELETE)
//SW01WK02 DD DSN=MYFILE.SORTWK02,SPACE=(CYL,(3000,500)),UNIT=3390,
// DISP=(NEW,DELETE,DELETE)
//SW01WK03 DD DSN=MYFILE.SORTWK03,SPACE=(CYL,(3000,500)),UNIT=3390,
// DISP=(NEW,DELETE,DELETE)
//SW02WK01 DD DSN=MYFILE.SORTWK04,SPACE=(CYL,(3000,500)),UNIT=3390,
// DISP=(NEW,DELETE,DELETE)
//SW02WK02 DD DSN=MYFILE.SORTWK05,SPACE=(CYL,(3000,500)),UNIT=3390,
// DISP=(NEW,DELETE,DELETE)
//SW02WK03 DD DSN=MYFILE.SORTWK06,SPACE=(CYL,(3000,500)),UNIT=3390,
// DISP=(NEW,DELETE,DELETE)
//SW03WK01 DD DSN=MYFILE.SORTWK07,SPACE=(CYL,(3000,500)),UNIT=3390,
// DISP=(NEW,DELETE,DELETE)
//SW03WK02 DD DSN=MYFILE.SORTWK08,SPACE=(CYL,(3000,500)),UNIT=3390,
// DISP=(NEW,DELETE,DELETE)
//SW03WK03 DD DSN=MYFILE.SORTWK09,SPACE=(CYL,(3000,500)),UNIT=3390,
// DISP=(NEW,DELETE,DELETE) /

Met vriendelijke groet,

Oscar Paalman
Belastingdienst/Centrum voor ICT

----- Doorgestuurd door Oscar O.H.C.M. Paalman/CICT/BLD op 22-12-2008 13:24
-----

Adam Baldwin
<[login to unmask email]
BM.COM> Aan
Verzonden door: [login to unmask email]
DB2 Data Base Cc
Discussion List
<[login to unmask email] Onderwerp
ORG> [DB2-L] [z/OS DB2 V8] CA Log
Analyzer DFSORT S0C4

22-12-2008 12:42


Antwoord a.u.b.
aan
DB2 Database
Discussion list
at IDUG
<[login to unmask email]
2-l.org>






Fellow Listers, I'm trying to run a CA Log Analyzer process to extract DDL
for a
dropped tablespace and I can't round getting S0C4 abends in the sort. I've
reduced the log interval to only 1 (one) second as I know the exact time of

the drop but no success...

...

START = (DATE(2008-12-22),TIME(11:19:37.00))
END = (DATE(2008-12-22),TIME(11:19:38.00))
LOGSRC = (BSDS)
OBJSRC = (CATALOG)
COPYSRC = (CATALOG)
DYNSORT = (DSNUM(12),SPACE(100,100),MAINSIZE(6000),MSG(Y))

I've tried with DSNUM from 1 up to 12, I've had MAINSIZE from 1000 up to
10000, and I've run the job with region size from 3m, 4m, 6m, 8m to 0m.

Every time I get:

LAE0008E SORT terminating. Return/Abend Code: 0C4

Anyone know of how to get round this?

Thanks, Adam

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L
list archives, FAQ, and delivery preferences are at
http://www.idug.org/lsidug under the Listserv tab. While at the site, you
can also access the IDUG Online Learning Center, Tech Library and Code
Place, see the latest IDUG conference information and much more. If you
have not yet signed up for Basic Membership in IDUG, available at no cost,
click on Member Services at http://www.idug.org/lsms



------------------------------------------------------------------------
De Belastingdienst gebruikt e-mail niet voor de uitwisseling van
vertrouwelijke informatie met de burger of voor de bekendmaking
van beslissingen. De Belastingdienst hanteert conventies voor het
gebruik van e-mail. Deze zijn te vinden op www.belastingdienst.nl.


______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

Adam Baldwin

Re: [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Oscar Paalman)
Thanks for all of the replies - on and off list.

I've now got it to work by going a different route through Log Analyzer.

Cheers, Adam

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/lsNA *
______________________________________________________________________



The IDUG DB2-L Listserv is only part of your membership in IDUG. The DB2-L list archives, FAQ, and delivery preferences are at http://www.idug.org/lsidug under the Listserv tab. While at the site, you can also access the IDUG Online Learning Center, Tech Library and Code Place, see the latest IDUG conference information and much more. If you have not yet signed up for Basic Membership in IDUG, available at no cost, click on Member Services at http://www.idug.org/lsms

steve mallett

Re: [z/OS DB2 V8] CA Log Analyzer DFSORT S0C4
(in response to Adam Baldwin)
Adam,

Probably not much help but we often use more space than that
and MSG(Y) gives us UTPRINxxx with occasionally useful messages
but apart from that try limiting the log records being sorted with table filters
of only the CATALOG tables your interested in (there might be a lot of useless
SYSHIST rows or similar that are giving you a problem)

Cheers,
Steve M

______________________________________________________________________

* IDUG 2009 Denver, CO, USA * May 11-15, 2009 * http://IDUG.ORG/Events *
______________________________________________________________________




IDUG.org was recently updated requiring members to use a new password. You should have gotten an e-mail with the temporary password assigned to your account. Please log in and update your member profile. If you are not already an IDUG.org member, please register at http://www.idug.org/component/juser/register.html