[DB2-L] Plan Management -DB2 z/os- PLANMGMT

Walter Janißen

[DB2-L] Plan Management -DB2 z/os- PLANMGMT
Hi

With the ZPARM you can turn it on system-wide. But if you don't use the zparm, you can nevertheless bind packages with PLANMGMT. So if there are copies of certain packages, you can switch back and forth as long as the package copy is valid.

Mit freundlichen Grüßen
Walter Janissen

ITERGO Informationstechnologie GmbH
Anwendungsentwicklung
Laufzeitarchitektur
Victoriaplatz 2
40477 Düsseldorf
mailto:[login to unmask email]

Vorsitzender des Aufsichtsrates: Jürgen Vetter
Geschäftsführung: Dr. Bettina Anders (Vorsitzende),
Ina Kirchhof, Dr. Christian Nymphius, Dr. Michael Regauer, Wolfgang Schön.
Sitz: Düsseldorf, Handelsregister: Amtsgericht Düsseldorf, HRB 37996


-----Ursprüngliche Nachricht-----
Von: IDUG DB2-L [mailto:[login to unmask email] Im Auftrag von Bob Jeandron
Gesendet: Dienstag, 9. Februar 2010 15:06
An: [login to unmask email]
Betreff: [DB2-L] Plan Management -DB2 z/os- PLANMGMT

Any body using this? Looks good to protect yourself during migration.
Run into space issues with SPT01?

Would it be possible to:
-Turn on PLANMGMT with EXTENDED.
-Rebind application, to save original V8 packages
-Turn off PLANMGMT, and still be able to SWITCH back to the saved
package?

Will test but would like to know if anyone has already been down that road.

Thanks in advance.

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

Phil Grainger

Re: Plan Management -DB2 z/os- PLANMGMT
(in response to Gerald Hodge)
To answer your questions randomly...

You can't "turn on and turn off" plan management, it is always ON

What you CAN do, is change the global default in zparm from "OFF" to "EXTENDED" - this means that ANY rebind that doesn't otherwise explicitly specify a plan management option, will get extended (someone could still do a rebind PLANMGMT(OFF) if they wanted)

However, then you are spot on - you could rebind everything under V8 with global plan management(extended), migrate to DB2 9, rebind AGAIN with plan management(extended) and then be able to switch back to V8 with a rebind SWITCH(PREVIOUS or ORIGINAL)

Bear in mind though, that if you change your global zparm to OFF and then do a rebind without specifying BASIC or EXTENDED, I suspect that stops you switching back (but I haven't tested this scenario yet)

Phil Grainger
Grainger Database Solutions Ltd

[login to unmask email]
+44 (0)1298 872148
+44 (0)7505 266768

www.graingerdatabasesolutions.com

-----Original Message-----
From: IDUG DB2-L [mailto:[login to unmask email] On Behalf Of Bob Jeandron
Sent: 09 February 2010 14:06
To: [login to unmask email]
Subject: [DB2-L] Plan Management -DB2 z/os- PLANMGMT

Any body using this? Looks good to protect yourself during migration.
Run into space issues with SPT01?

Would it be possible to:
-Turn on PLANMGMT with EXTENDED.
-Rebind application, to save original V8 packages
-Turn off PLANMGMT, and still be able to SWITCH back to the saved
package?

Will test but would like to know if anyone has already been down that road.

Thanks in advance.

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

Gerald Hodge

Re: Plan Management -DB2 z/os- PLANMGMT
(in response to Walter Janißen)
Bob:

There are two ways of implementing Plan Management. One is by turning on the ZPARM and the other is by using the parameter on the rebind control cards. You should apply the fix to compress SPT01, as use of this function will seriously increase the size of SPT01 without that fix. For a migration, we strongly suggest using EXTENDED. This will allow fall back to the original access pathing in your worst case scenario.

Things to remember:
A bind of the package, as opposed to a rebind, will wipe out all of the associated SPT01 entries. There is no backup.
The setting on the rebind control cards will override the ZPARM setting.
This will have an impact on FREE commands if you generate them from the present data.
You will have to do a switch to go back to the original or previous rebind and this may entail an outage.

We have seen people very relieved to have this feature, which is why we suggest using EXTENDED as opposed to BASIC.

You should run DSNTIJP9 to determine which packages will be automatically rebound. We find people surprised at this. If you are going to allow automatic rebinds, in contrast to doing them before the migration, setting the ZPARM to EXTENDED is very important. If you did a global rebind with the V8 migration you should have no such risks. What we are seeing is a fair number of sites that did not rebind V4 packages. These are at risk if the automatic rebinding in the migration changes any access pathing. 90% or more of the changes are fine. When were you last complemented for getting 90% of something correct? There is risk to manage.

I am a member of IBM's Gold Team for DB2. If you wish to discuss what we have seen please contact me offline and we can do a Web meeting.

Sincerely,

Gerald Hodge
HLS Technologies, Inc.
www.hlstechnologies.com
888-494-9019





-----Original Message-----
From: IDUG DB2-L [mailto:[login to unmask email] On Behalf Of Bob Jeandron
Sent: Tuesday, February 09, 2010 8:06 AM
To: [login to unmask email]
Subject: [DB2-L] Plan Management -DB2 z/os- PLANMGMT

Any body using this? Looks good to protect yourself during migration.
Run into space issues with SPT01?

Would it be possible to:
-Turn on PLANMGMT with EXTENDED.
-Rebind application, to save original V8 packages
-Turn off PLANMGMT, and still be able to SWITCH back to the saved
package?

Will test but would like to know if anyone has already been down that road.

Thanks in advance.

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

Bob Jeandron

Re: Plan Management -DB2 z/os- PLANMGMT
(in response to Phil Grainger)
Thanks for the reply, Phil.
Have a ? about the rebind under V8...
Was under the impression we could do the rebind under V9 and that would
save the V8 package as the "original".

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

Phil Grainger

Re: Plan Management -DB2 z/os- PLANMGMT
(in response to Bob Jeandron)
Bob very politely pointed out privately that I wasn't concentrating

What I MEANT to say was:

What you CAN do, is change the global default in zparm from "OFF" to "EXTENDED" - this means that ANY rebind that doesn't otherwise explicitly specify a plan management option, will get extended (someone could still do a rebind PLANMGMT(OFF) if they wanted)

However, then you are spot on - you could rebind everything immediately you get to DB2 9 to save the V8 access paths as "original", do you migration rebinds with plan management(extended) and then be able to switch back to V8 access paths with a rebind SWITCH(ORIGINAL)

Obviously too excited about DB2 10 (there - I said TEN and not X!!!)

Phil Grainger
Grainger Database Solutions Ltd

[login to unmask email]
+44 (0)1298 872148
+44 (0)7505 266768

www.graingerdatabasesolutions.com


-----Original Message-----
From: Phil Grainger [mailto:[login to unmask email]
Sent: 09 February 2010 14:46
To: 'IDUG DB2-L'
Subject: RE: [DB2-L] Plan Management -DB2 z/os- PLANMGMT

To answer your questions randomly...

You can't "turn on and turn off" plan management, it is always ON

What you CAN do, is change the global default in zparm from "OFF" to "EXTENDED" - this means that ANY rebind that doesn't otherwise explicitly specify a plan management option, will get extended (someone could still do a rebind PLANMGMT(OFF) if they wanted)

However, then you are spot on - you could rebind everything under V8 with global plan management(extended), migrate to DB2 9, rebind AGAIN with plan management(extended) and then be able to switch back to V8 with a rebind SWITCH(PREVIOUS or ORIGINAL)

Bear in mind though, that if you change your global zparm to OFF and then do a rebind without specifying BASIC or EXTENDED, I suspect that stops you switching back (but I haven't tested this scenario yet)

Phil Grainger
Grainger Database Solutions Ltd

[login to unmask email]
+44 (0)1298 872148
+44 (0)7505 266768

www.graingerdatabasesolutions.com

-----Original Message-----
From: IDUG DB2-L [mailto:[login to unmask email] On Behalf Of Bob Jeandron
Sent: 09 February 2010 14:06
To: [login to unmask email]
Subject: [DB2-L] Plan Management -DB2 z/os- PLANMGMT

Any body using this? Looks good to protect yourself during migration.
Run into space issues with SPT01?

Would it be possible to:
-Turn on PLANMGMT with EXTENDED.
-Rebind application, to save original V8 packages
-Turn off PLANMGMT, and still be able to SWITCH back to the saved
package?

Will test but would like to know if anyone has already been down that road.

Thanks in advance.

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

Terry Purcell

Re: Plan Management -DB2 z/os- PLANMGMT
(in response to Phil Grainger)
Additional points.

Remember, the default is OFF. As Gerry and Phil have stated - it can be very
beneficial to enable either EXTENDED (preferred choice) or BASIC.

With regard to REBIND with OFF after prior REBIND with BASIC or
EXTENDED - OFF will NOT render the previous/original copy as unusable.
Therefore, to clarify (and repeat), you CAN REBIND with BASIC, followed by
OFF, and followed by REBIND SWITCH.

Regards
Terry

On Tue, 9 Feb 2010 15:45:41 -0000, Phil Grainger
<[login to unmask email]> wrote:

>Bob very politely pointed out privately that I wasn't concentrating
>
>What I MEANT to say was:
>
>What you CAN do, is change the global default in zparm from "OFF"
to "EXTENDED" - this means that ANY rebind that doesn't otherwise
explicitly specify a plan management option, will get extended (someone
could still do a rebind PLANMGMT(OFF) if they wanted)
>
>However, then you are spot on - you could rebind everything immediately
you get to DB2 9 to save the V8 access paths as "original", do you migration
rebinds with plan management(extended) and then be able to switch back to
V8 access paths with a rebind SWITCH(ORIGINAL)
>
>Obviously too excited about DB2 10 (there - I said TEN and not X!!!)
>
>Phil Grainger
>Grainger Database Solutions Ltd
>
>[login to unmask email]
>+44 (0)1298 872148
>+44 (0)7505 266768
>
>www.graingerdatabasesolutions.com
>
>
>-----Original Message-----
>From: Phil Grainger [mailto:[login to unmask email]
>Sent: 09 February 2010 14:46
>To: 'IDUG DB2-L'
>Subject: RE: [DB2-L] Plan Management -DB2 z/os- PLANMGMT
>
>To answer your questions randomly...
>
>You can't "turn on and turn off" plan management, it is always ON
>
>What you CAN do, is change the global default in zparm from "OFF"
to "EXTENDED" - this means that ANY rebind that doesn't otherwise
explicitly specify a plan management option, will get extended (someone
could still do a rebind PLANMGMT(OFF) if they wanted)
>
>However, then you are spot on - you could rebind everything under V8 with
global plan management(extended), migrate to DB2 9, rebind AGAIN with
plan management(extended) and then be able to switch back to V8 with a
rebind SWITCH(PREVIOUS or ORIGINAL)
>
>Bear in mind though, that if you change your global zparm to OFF and then
do a rebind without specifying BASIC or EXTENDED, I suspect that stops
you switching back (but I haven't tested this scenario yet)
>
>Phil Grainger
>Grainger Database Solutions Ltd
>
>[login to unmask email]
>+44 (0)1298 872148
>+44 (0)7505 266768
>
>www.graingerdatabasesolutions.com
>
>-----Original Message-----
>From: IDUG DB2-L [mailto:[login to unmask email] On Behalf Of Bob
Jeandron
>Sent: 09 February 2010 14:06
>To: [login to unmask email]
>Subject: [DB2-L] Plan Management -DB2 z/os- PLANMGMT
>
>Any body using this? Looks good to protect yourself during migration.
>Run into space issues with SPT01?
>
>Would it be possible to:
>-Turn on PLANMGMT with EXTENDED.
>-Rebind application, to save original V8 packages
>-Turn off PLANMGMT, and still be able to SWITCH back to the saved
>package?
>
>Will test but would like to know if anyone has already been down that road.
>
>Thanks in advance.
>
>__________________________________________________________
___________
>
>* IDUG North America * Tampa, Florida, * May 10-14 2010 *
http://IDUG.ORG/NA *
>** If you are going to attend only one conference this year, this is it!
>
>__________________________________________________________
___________
>http://www.IDUG.org/mentor
>Mentoring should be a rewarding experience for everyone...
>IDUG is offering up to $1600 off when you both come to the conference!
>__________________________________________________________
___________
>
>If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is
the home of IDUG's DB2-L
>
>__________________________________________________________
___________
>
>* IDUG North America * Tampa, Florida, * May 10-14 2010 *
http://IDUG.ORG/NA *
>** If you are going to attend only one conference this year, this is it!
>
>__________________________________________________________
___________
>http://www.IDUG.org/mentor
>Mentoring should be a rewarding experience for everyone...
>IDUG is offering up to $1600 off when you both come to the conference!
>__________________________________________________________
___________
>
>If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is
the home of IDUG's DB2-L

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

Phil Grainger

Re: Plan Management -DB2 z/os- PLANMGMT
(in response to Terry Purcell)
Cool, thanks Terry

So it's only a BIND that will automatically eradicate prior versions - that’s neat

Phil Grainger
Grainger Database Solutions Ltd

[login to unmask email]
+44 (0)1298 872148
+44 (0)7505 266768

www.graingerdatabasesolutions.com


-----Original Message-----
From: IDUG DB2-L [mailto:[login to unmask email] On Behalf Of Terry Purcell
Sent: 09 February 2010 15:55
To: [login to unmask email]
Subject: Re: [DB2-L] Plan Management -DB2 z/os- PLANMGMT

Additional points.

Remember, the default is OFF. As Gerry and Phil have stated - it can be very
beneficial to enable either EXTENDED (preferred choice) or BASIC.

With regard to REBIND with OFF after prior REBIND with BASIC or
EXTENDED - OFF will NOT render the previous/original copy as unusable.
Therefore, to clarify (and repeat), you CAN REBIND with BASIC, followed by
OFF, and followed by REBIND SWITCH.

Regards
Terry

On Tue, 9 Feb 2010 15:45:41 -0000, Phil Grainger
<[login to unmask email]> wrote:

>Bob very politely pointed out privately that I wasn't concentrating
>
>What I MEANT to say was:
>
>What you CAN do, is change the global default in zparm from "OFF"
to "EXTENDED" - this means that ANY rebind that doesn't otherwise
explicitly specify a plan management option, will get extended (someone
could still do a rebind PLANMGMT(OFF) if they wanted)
>
>However, then you are spot on - you could rebind everything immediately
you get to DB2 9 to save the V8 access paths as "original", do you migration
rebinds with plan management(extended) and then be able to switch back to
V8 access paths with a rebind SWITCH(ORIGINAL)
>
>Obviously too excited about DB2 10 (there - I said TEN and not X!!!)
>
>Phil Grainger
>Grainger Database Solutions Ltd
>
>[login to unmask email]
>+44 (0)1298 872148
>+44 (0)7505 266768
>
>www.graingerdatabasesolutions.com
>
>
>-----Original Message-----
>From: Phil Grainger [mailto:[login to unmask email]
>Sent: 09 February 2010 14:46
>To: 'IDUG DB2-L'
>Subject: RE: [DB2-L] Plan Management -DB2 z/os- PLANMGMT
>
>To answer your questions randomly...
>
>You can't "turn on and turn off" plan management, it is always ON
>
>What you CAN do, is change the global default in zparm from "OFF"
to "EXTENDED" - this means that ANY rebind that doesn't otherwise
explicitly specify a plan management option, will get extended (someone
could still do a rebind PLANMGMT(OFF) if they wanted)
>
>However, then you are spot on - you could rebind everything under V8 with
global plan management(extended), migrate to DB2 9, rebind AGAIN with
plan management(extended) and then be able to switch back to V8 with a
rebind SWITCH(PREVIOUS or ORIGINAL)
>
>Bear in mind though, that if you change your global zparm to OFF and then
do a rebind without specifying BASIC or EXTENDED, I suspect that stops
you switching back (but I haven't tested this scenario yet)
>
>Phil Grainger
>Grainger Database Solutions Ltd
>
>[login to unmask email]
>+44 (0)1298 872148
>+44 (0)7505 266768
>
>www.graingerdatabasesolutions.com
>
>-----Original Message-----
>From: IDUG DB2-L [mailto:[login to unmask email] On Behalf Of Bob
Jeandron
>Sent: 09 February 2010 14:06
>To: [login to unmask email]
>Subject: [DB2-L] Plan Management -DB2 z/os- PLANMGMT
>
>Any body using this? Looks good to protect yourself during migration.
>Run into space issues with SPT01?
>
>Would it be possible to:
>-Turn on PLANMGMT with EXTENDED.
>-Rebind application, to save original V8 packages
>-Turn off PLANMGMT, and still be able to SWITCH back to the saved
>package?
>
>Will test but would like to know if anyone has already been down that road.
>
>Thanks in advance.
>
>__________________________________________________________
___________
>
>* IDUG North America * Tampa, Florida, * May 10-14 2010 *
http://IDUG.ORG/NA *
>** If you are going to attend only one conference this year, this is it!
>
>__________________________________________________________
___________
>http://www.IDUG.org/mentor
>Mentoring should be a rewarding experience for everyone...
>IDUG is offering up to $1600 off when you both come to the conference!
>__________________________________________________________
___________
>
>If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is
the home of IDUG's DB2-L
>
>__________________________________________________________
___________
>
>* IDUG North America * Tampa, Florida, * May 10-14 2010 *
http://IDUG.ORG/NA *
>** If you are going to attend only one conference this year, this is it!
>
>__________________________________________________________
___________
>http://www.IDUG.org/mentor
>Mentoring should be a rewarding experience for everyone...
>IDUG is offering up to $1600 off when you both come to the conference!
>__________________________________________________________
___________
>
>If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is
the home of IDUG's DB2-L

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

Gerald Hodge

Re: Plan Management -DB2 z/os- PLANMGMT
(in response to Phil Grainger)
Bob:

If there is an auto rebind then you need to have the ZPARM set for BASIC or EXTENDED. Other than that the rebind to gain V9 functionality can wait until the migration is done. If you rebind in V8 then you will escape the auto rebind situation.

We strongly suggest running DSNTIJP9 to find any surprises before they find you.

Gerald Hodge
HLS Technologies, Inc.
www.hlstechnologies.com
888-494-9019

-----Original Message-----
From: IDUG DB2-L [mailto:[login to unmask email] On Behalf Of Bob Jeandron
Sent: Tuesday, February 09, 2010 9:16 AM
To: [login to unmask email]
Subject: Re: [DB2-L] Plan Management -DB2 z/os- PLANMGMT

Thanks for the reply, Phil.
Have a ? about the rebind under V8...
Was under the impression we could do the rebind under V9 and that would
save the V8 package as the "original".

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L

_____________________________________________________________________

* IDUG North America * Tampa, Florida, * May 10-14 2010 * http://IDUG.ORG/NA *
** If you are going to attend only one conference this year, this is it!

_____________________________________________________________________
http://www.IDUG.org/mentor
Mentoring should be a rewarding experience for everyone...
IDUG is offering up to $1600 off when you both come to the conference!
_____________________________________________________________________

If you need to change settings, http://www.idug.org/cgi-bin/wa?A0=DB2-L is the home of IDUG's DB2-L