DB2 Print Log Map DSNJU004 Error message

Lee Mandel

DB2 Print Log Map DSNJU004 Error message
Hi All,
We are not using data sharing members yet. We are on V5 of DB2. When we
use the print log map utility DSNUJ004 if you do not have a sysin dd
statement you get error message DSNJ237I It is only a info message. If we
use a sysin dd statement and put member(*) or any keyword we still get the
same message. Any way around this?

TIA
Lee



Sanjeev (CTS) S

Re: DB2 Print Log Map DSNJU004 Error message
(in response to Lee Mandel)
Could you please send your JCL because i am sure you are aware of why
DSN237I (informational message) is issued.
Just check if you are specifying it correctly.

Is this something like this ?

//SYSIN DD*
MEMBER(*)

HTH
Regards
Sanjeev




> -----Original Message-----
> From: Lee Mandel [SMTP:[login to unmask email]
> Sent: Tuesday, January 09, 2001 5:12 AM
> To: [login to unmask email]
> Subject: DB2 Print Log Map DSNJU004 Error message
>
> Hi All,
> We are not using data sharing members yet. We are on V5 of DB2. When we
> use the print log map utility DSNUJ004 if you do not have a sysin dd
> statement you get error message DSNJ237I It is only a info message. If
> we
> use a sysin dd statement and put member(*) or any keyword we still get the
> same message. Any way around this?
>
> TIA
> Lee
>
>
>
>
>
-----------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------
This e-mail and any files transmitted with it are for the sole use
of the intended recipient(s) and may contain confidential and privileged information.
If you are not the intended recipient, please contact the sender by reply e-mail and
destroy all copies of the original message. Any unauthorised review, use, disclosure,
dissemination, forwarding, printing or copying of this email or any action taken in
reliance on this e-mail is strictly prohibited and may be unlawful.

Visit us at http://www.cognizant.com
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------



Michael Ebert

Re: DB2 Print Log Map DSNJU004 Error message
(in response to Sanjeev (CTS) S)
Hi Lee,

we're on DB2 V5, no data sharing. This JCL works for us, RC=0, no error message,
informational or otherwise:

//OSO031JU JOB (USERJOB,ME),'M.EBERT X3962',CLASS=Y,MSGCLASS=D,
// MSGLEVEL=(1,1),REGION=0M,NOTIFY=&SYSUID
/*JOBPARM SYSAFF=AMAC
//*------- DSNJU004 - Print Log Map (Util. Guide p. 3-28) --------------
//DSNJU004 EXEC PGM=DSNJU004
//SYSUT1 DD DISP=SHR,DSN=DB2T.BSDS01
//SYSPRINT DD SYSOUT=*

Dr. Michael Ebert
DB2 Database Administrator
aMaDEUS Data Processing
Erding / Munich, Germany



From: Lee Mandel <[login to unmask email]> on 08/01/2001 23:42 GMT

Please respond to DB2 Data Base Discussion List <[login to unmask email]>
|--------->
| |
|--------->
>--------------------------------------------------------------------------->
| |
>--------------------------------------------------------------------------->
>-------------------------------------------|
| |
>-------------------------------------------|
|--------->
|To: |
|--------->
>--------------------------------------------------------------------------->
|[login to unmask email] |
>--------------------------------------------------------------------------->
>-------------------------------------------|
| |
| |
>-------------------------------------------|
|--------->
|cc: |
|--------->
>--------------------------------------------------------------------------->
| (bcc: Michael Ebert/MUC/AMADEUS) |
>--------------------------------------------------------------------------->
>-------------------------------------------|
| |
| |
>-------------------------------------------|
|--------->
| |
|--------->
>--------------------------------------------------------------------------->
| |
>--------------------------------------------------------------------------->
>-------------------------------------------|
| |
>-------------------------------------------|
|--------->
|Subject: |
|--------->
>--------------------------------------------------------------------------->
|DB2 Print Log Map DSNJU004 Error message |
>--------------------------------------------------------------------------->
>-------------------------------------------|
| |
>-------------------------------------------|



Hi All,
We are not using data sharing members yet. We are on V5 of DB2. When we
use the print log map utility DSNUJ004 if you do not have a sysin dd
statement you get error message DSNJ237I It is only a info message. If we
use a sysin dd statement and put member(*) or any keyword we still get the
same message. Any way around this?

TIA
Lee



Edward C. Benoit Jr.

Re: DB2 Print Log Map DSNJU004 Error message
(in response to Michael Ebert)
Sanjeev,
I am executing it foreground:
PROC 0
/* RKIDBC55
CONTROL END(ENDO)
SET &RESULT = &SYSDSN('&SYSUID..SYSPRINT')
IF &RESULT ¬= OK THEN DO
ALLOC REUSE F(SYSPRINT) DS('&SYSUID..SYSPRINT') NEW +
SPACE(3,3) CYLINDERS RECFM(F B A) LRECL(121)
ENDO
ISPEXEC VGET (BSDSDSN1 BSDSDSN2 DSNLOAD HILEV) SHARED
ALLOC REUSE F(SYSUT1) DS('&BSDSDSN1.') SHR
ALLOC REUSE F(SYSUT2) DS('&BSDSDSN2.') SHR
ALLOC REUSE F(SYSPRINT) DS('&SYSUID..SYSPRINT') SHR
ALLOC REUSE F(SYSIN) DS('&HILEV..SKELS(MEMBER)') SHR
CALL '&DSNLOAD.(DSNJU004)'
ISPEXEC BROWSE DATASET('&SYSUID..SYSPRINT')
EXIT
The skels(member) below:
MEMBER(*)

I get this message:
dsnj237i dsnju004 invalid control statement. the first word must be
'member'

The first word is member but I still get the message.
Can you spot anything I am doing incorrect?

Thanks,
Ed.



Sanjeev (CTS) S

Re: DB2 Print Log Map DSNJU004 Error message
(in response to Edward C. Benoit Jr.)
From my level of knowledge in CLIST, i can not judge how the SYSIN parameter
will be passed but it looks correct to me.Just had a quick look at my CLIST
manual but could not find much. Please wait for replies from someone who
knows CLIST better than me(anyone could be). I can only suggest you to look
if the SYSIN parameters are resolved correctly or not. It should be
MEMBER(*) only.

I am sure this will not help much................

Regards,
Sanjeev

> -----Original Message-----
> From: Edward C. Benoit Jr. [SMTP:[login to unmask email]
> Sent: Tuesday, January 09, 2001 3:44 PM
> To: [login to unmask email]
> Subject: Re: DB2 Print Log Map DSNJU004 Error message
>
> Sanjeev,
> I am executing it foreground:
> PROC 0
> /* RKIDBC55
> CONTROL END(ENDO)
> SET &RESULT = &SYSDSN('&SYSUID..SYSPRINT')
> IF &RESULT ¬= OK THEN DO
> ALLOC REUSE F(SYSPRINT) DS('&SYSUID..SYSPRINT') NEW +
> SPACE(3,3) CYLINDERS RECFM(F B A) LRECL(121)
> ENDO
> ISPEXEC VGET (BSDSDSN1 BSDSDSN2 DSNLOAD HILEV) SHARED
> ALLOC REUSE F(SYSUT1) DS('&BSDSDSN1.') SHR
> ALLOC REUSE F(SYSUT2) DS('&BSDSDSN2.') SHR
> ALLOC REUSE F(SYSPRINT) DS('&SYSUID..SYSPRINT') SHR
> ALLOC REUSE F(SYSIN) DS('&HILEV..SKELS(MEMBER)') SHR
> CALL '&DSNLOAD.(DSNJU004)'
> ISPEXEC BROWSE DATASET('&SYSUID..SYSPRINT')
> EXIT
> The skels(member) below:
> MEMBER(*)
>
> I get this message:
> dsnj237i dsnju004 invalid control statement. the first word must be
> 'member'
>
> The first word is member but I still get the message.
> Can you spot anything I am doing incorrect?
>
> Thanks,
> Ed.
>
>
>
> http://www.ryci.com/db2-l. The owners of the list can be reached at
> [login to unmask email]
-----------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------
This e-mail and any files transmitted with it are for the sole use
of the intended recipient(s) and may contain confidential and privileged information.
If you are not the intended recipient, please contact the sender by reply e-mail and
destroy all copies of the original message. Any unauthorised review, use, disclosure,
dissemination, forwarding, printing or copying of this email or any action taken in
reliance on this e-mail is strictly prohibited and may be unlawful.

Visit us at http://www.cognizant.com
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------



Piontkowski Michael ML

Re: DB2 Print Log Map DSNJU004 Error message
(in response to Sanjeev (CTS) S)
Remove the parenthesis ().
The syntax is MEMBER *
Also add the GROUP DDNAME.


Mike Piontkowski
TP&S Technical Maintenance
Voice: +1 302.886.4612
Fax: +1 302.886.4749


-----Original Message-----
From: Edward C. Benoit Jr. [mailto:[login to unmask email]
Sent: Tuesday, January 09, 2001 5:14
To: [login to unmask email]
Subject: Re: [DB2-L] DB2 Print Log Map DSNJU004 Error message


Sanjeev,
I am executing it foreground:
PROC 0
/* RKIDBC55
CONTROL END(ENDO)
SET &RESULT = &SYSDSN('&SYSUID..SYSPRINT')
IF &RESULT ¬= OK THEN DO
ALLOC REUSE F(SYSPRINT) DS('&SYSUID..SYSPRINT') NEW +
SPACE(3,3) CYLINDERS RECFM(F B A) LRECL(121)
ENDO
ISPEXEC VGET (BSDSDSN1 BSDSDSN2 DSNLOAD HILEV) SHARED
ALLOC REUSE F(SYSUT1) DS('&BSDSDSN1.') SHR
ALLOC REUSE F(SYSUT2) DS('&BSDSDSN2.') SHR
ALLOC REUSE F(SYSPRINT) DS('&SYSUID..SYSPRINT') SHR
ALLOC REUSE F(SYSIN) DS('&HILEV..SKELS(MEMBER)') SHR
CALL '&DSNLOAD.(DSNJU004)'
ISPEXEC BROWSE DATASET('&SYSUID..SYSPRINT')
EXIT
The skels(member) below:
MEMBER(*)

I get this message:
dsnj237i dsnju004 invalid control statement. the first word must be
'member'

The first word is member but I still get the message.
Can you spot anything I am doing incorrect?

Thanks,
Ed.



http://www.ryci.com/db2-l. The owners of the list can be reached at
[login to unmask email]