Re: UDB on NT - NETBIOS errors

Bruce ALLEN

Re: UDB on NT - NETBIOS errors
(in response to Milorad_Cerovac@TAC.VIC.GOV.AU)
Hi Milorad,
UDB/NT Messages manual has NETBIOS errors in Appendix A (x23 is invalid
adapter). It suggests:
<<For more information on NetBIOS return codes, refer to the Local Area
Network technical reference>>
Unfortunately, nothing for the DIA error messages.

HTH,
Bruce

> -----Original Message-----
> From: [login to unmask email] [SMTP:[login to unmask email]
> Sent: Wednesday, 15 December 1999 15:49
> To: [login to unmask email]
> Subject: UDB on NT - NETBIOS errors
>
> Dear Listers, we've been experiencing a number of problems this morning
> with our DB2 UDB v 5 production system running on NT. The following
> messages are being displayed:
>
> DIA3419C "NETBIOS" protocol support error: unexpected return code from the
> NetBIOS "RESET" command. rc = 0x"23" for adapter "2".
>
> DIA3427C "NETBIOS" protocol support: None of the specified adapters are
> useable. The "NETBIOS" protocol support cannot be initialized.
>
> Thus far we've been unable to locate these diagnostic messages in amongst
> the IBM online maunals. Is there any place where these messages are
> stored
> so as to determine what, why et al ... is happening and how the problems
> can be resolved? We fixed the problem by rebooting the servers, and now
> we're trying to determine the cause.
>
> Many thanks.
> Milorad
>
>
>
>
>

[login to unmask email]

UDB on NT - NETBIOS errors
Dear Listers, we've been experiencing a number of problems this morning
with our DB2 UDB v 5 production system running on NT. The following
messages are being displayed:

DIA3419C "NETBIOS" protocol support error: unexpected return code from the
NetBIOS "RESET" command. rc = 0x"23" for adapter "2".

DIA3427C "NETBIOS" protocol support: None of the specified adapters are
useable. The "NETBIOS" protocol support cannot be initialized.

Thus far we've been unable to locate these diagnostic messages in amongst
the IBM online maunals. Is there any place where these messages are stored
so as to determine what, why et al ... is happening and how the problems
can be resolved? We fixed the problem by rebooting the servers, and now
we're trying to determine the cause.

Many thanks.
Milorad



Kurt Sahlberg

Re: UDB on NT - NETBIOS errors
(in response to Bruce ALLEN)
According to the messages reference RC=23 is an Invalid adapter
no further information is available. Contact support they will be able to
assist you.
Kurt


>>> <[login to unmask email]> 12/14/99 10:48PM >>>
Dear Listers, we've been experiencing a number of problems this morning
with our DB2 UDB v 5 production system running on NT. The following
messages are being displayed:

DIA3419C "NETBIOS" protocol support error: unexpected return code from the
NetBIOS "RESET" command. rc = 0x"23" for adapter "2".

DIA3427C "NETBIOS" protocol support: None of the specified adapters are
useable. The "NETBIOS" protocol support cannot be initialized.

Thus far we've been unable to locate these diagnostic messages in amongst
the IBM online maunals. Is there any place where these messages are stored
so as to determine what, why et al ... is happening and how the problems
can be resolved? We fixed the problem by rebooting the servers, and now
we're trying to determine the cause.

Many thanks.
Milorad